What is the principle of the bending machine and its usage?

Principle: The pressure generated by the hydraulic system is transmitted through the mold to finally obtain the desired material shape. 3d wire bending machine ,

The usage of bending machine: 1. First, turn on the power supply, turn on the key switch on the control panel, and then press the oil pump to start, so you can hear the sound of the oil pump rotating.

2. The stroke adjustment, the use of the bending machine must pay attention to the adjustment stroke, be sure to test run before bending. When the upper die of the bending machine descends to the bottom, there must be a gap of plate thickness. Otherwise it will cause damage to the mold and the machine. The stroke adjustment also has electric quick adjustment and manual fine adjustment.

3. For the selection of bending notches, a notch with a width of 8 times the thickness of the plate should generally be selected.

4. Backgauge adjustment generally has electric quick adjustment and manual fine adjustment, the method is the same as the shearing machine.

5. Step on the foot switch to start bending. The bending machine is different from the shearing machine. You can release it at any time. When you release your foot, the bending machine will stop, and then step on to continue downward.

like:

How does the bending machine bend the steel into the required shape
What is the working principle of the bending machine
What are the advantages of 3d wire bending machine and 2d bending machine?